This article will cover the errors you may find displayed on your robot mower.


TABLE OF CONTENTS


The LED on the above button is flashing red rapidly and or no input is possible.

  • If you have never changed the PIN number, press the button 4 times (this is default).
  • The LED should turn off and the mower should unlock.
  • If you have set a PIN number, enter it in.
  • To reset the pin number see trouble-shooter, 'How to set PIN code'.


The LED on the above button is flashing blue and the robot returns to the station.

  • Outside of the active mowing time, press the hour button.
  • The LED should just remain blue and the robot should work normally.


The LED is red because the robot thinks it is off the ground.

  • Check the underside for any blockages and remove.
  • The LED should go off.
  • If the LED remains red, do a factory reset on the mower (see: 'How to factory reset').


The LED is red and the mower returns to the station.

  • The battery is empty and needs to charge.


  • The mower should return to the station and start charging. This can be identified by a flashing blue light when docked with charging station.