Lawnmover

Quick Answer

To attach the roller to your Yard Force LMG37A lawnmower, first remove the battery and ensure the machine is powered off. Apply gentle pressure to the two mounting points on either side of the roller to create enough space for it to slot into position. Once installed correctly, the roller should rotate freely and sit securely in its mounting points.

Tip: The roller is designed to be a tight fit, so some firm pressure may be required during installation.

Before You Start

Before fitting the roller:

• Switch the lawnmower off
• Remove the battery
• Place the lawnmower on a flat, stable surface

Always:

• Wear protective gloves when handling the mower
• Ensure the machine cannot accidentally start during installation

Important: Never fit or remove the roller while the battery is installed.

How to Attach the Roller

Follow these steps to install the roller correctly.

1. Prepare the mower

Ensure the battery has been removed and the mower is completely powered off.

Position the mower so you can safely access the rear roller mounting points.

2. Position the roller

Locate the two mounting points on either side of the roller.

Apply firm pressure to the mounting points to create enough clearance for the roller to fit between them.

This may require a little effort, as the roller is designed to fit securely.

3. Fit the roller

Carefully slot the roller into the mounting points.

Once installed:

• The roller should sit evenly on both sides
• It should rotate freely without binding
• It should remain securely attached

If the Roller Will Not Fit

If you are having difficulty installing the roller:

• Check that you are aligning both ends with the mounting points
• Apply even pressure to both mounting points while fitting the roller
• Ensure there is no dirt or debris preventing installation

Do not force the roller into place, as this may damage the mounting brackets.

If you are still unable to install the roller, please contact our customer service team via Live Chat or submit a support ticket.

Important Maintenance Tips

• Always remove the battery before carrying out maintenance
• Keep the roller and mounting points clean
• Check that the roller rotates freely before each use
• Inspect the roller for damage or excessive wear
• Store the mower in a clean, dry location

Frequently Asked Questions

Why is the roller difficult to fit?

The roller is designed to be a secure, tight fit. Applying firm, even pressure to the mounting points will create enough space for installation.

Should the roller rotate after installation?

Yes. Once fitted correctly, the roller should rotate freely while remaining securely attached.

Can I install the roller with the battery fitted?

No. Always remove the battery before fitting or removing the roller.

What should I do if the roller still won't fit?

Check that both mounting points are aligned correctly and free from debris. If you continue to experience difficulty, please contact our customer service team via Live Chat or submit a support ticket.