My Robot Mower is showing LED Panel Errors and Warnings

This article will cover the errors you may find displayed on your robot mower.

TABLE OF CONTENTS

• The LED on the above button is flashing red rapidly and or no input is possible.
• The LED on the above button is flashing blue and the robot returns to the station.
• The LED is red because the robot thinks it is off the ground.
• The LED is red and the mower returns to the station.
• Related articles

The LED on the above button is flashing red rapidly and or no input is possible.

• If you have never changed the PIN number, press the button 4 times (this is default).
• The LED should turn off and the mower should unlock.
• If you have set a PIN number, enter it in.
• To reset the pin number see trouble-shooter, 'How to set PIN code'.

The LED on the above button is flashing blue and the robot returns to the station.

• Outside of the active mowing time, press the hour button.
• The LED should just remain blue and the robot should work normally.

The LED is red because the robot thinks it is off the ground.

• Check the underside for any blockages and remove.
• The LED should go off.
• If the LED remains red, do a factory reset on the mower (see: 'How to factory reset').

The LED is red and the mower returns to the station.

• The battery is empty and needs to charge.

• The mower should return to the station and start charging. This can be identified by a flashing blue light when docked with charging station.

Related articles

How do I set the Pin Code on my Robot Mower