My Electric Lawnmowers motor is running but the blade will not

Quick Answer

If your electric lawnmower motor is running but the blade is not turning, the most likely cause is a worn or broken drive belt. Some models have replacement drive belts available, while others do not.

Tip: Do not continue using the lawnmower if the motor is running but the blade is stationary, as this could cause further damage.

Before You Start

Before inspecting your lawnmower:

• Switch the mower off
• Disconnect it from the mains power supply
• Allow all moving parts to come to a complete stop

Always wear protective gloves when working near the cutting blade.

Important: Never inspect the underside of the mower while it is connected to the power supply.

Why Is the Motor Running but the Blade Not Turning?

In most cases, this indicates that the drive belt has worn, slipped or broken.

The drive belt transfers power from the motor to the cutting blade. If it fails, the motor may continue to run normally while the blade remains stationary.

Check Whether a Replacement Belt Is Available

Replacement drive belts are only available for selected lawnmower models.

To find out whether a replacement belt is available:

• Check our website for compatible spare parts
• Contact our Technical Support Team with your model number

Replacing the Drive Belt

If a replacement belt is available for your model:

• Ensure the mower is disconnected from the power supply
• Follow the instructions provided for your model
• Fit the replacement belt carefully

Please note that replacing a drive belt can require significant force and careful alignment.

Incorrect installation may prevent the lawnmower from operating correctly.

If Your Lawnmower Is Within Warranty

If your lawnmower is still within its warranty period and:

• A drive belt is not available
• You are unable to replace the belt yourself

Please contact our Technical Support Team.

We'll advise you on the appropriate next steps, including any warranty support that may be available.

Important Information

• Do not continue using the mower if the blade is not rotating.
• Replacement drive belts are not available for every model.
• Always disconnect the mower from the mains before carrying out any inspection or repair.
• If you are unsure whether the belt has failed, contact our Technical Support Team for advice.

Frequently Asked Questions

Why is my motor running but the blade isn't turning?

The most common cause is a worn, damaged or broken drive belt that is no longer transferring power from the motor to the blade.

Can I replace the drive belt myself?

Yes, on models where replacement belts are available. However, fitting the belt can be difficult and must be carried out correctly.

Do you sell replacement drive belts?

Replacement drive belts are only available for selected lawnmower models. Please check our website or contact our Technical Support Team to confirm availability.

Can I continue using the mower?

No. If the motor is running but the blade is not turning, stop using the mower immediately to avoid further damage.

What if my mower is still under warranty?

If your mower is within its warranty period and you cannot replace the drive belt, please contact our Technical Support Team for further assistance.