How do I start my Electric Chainsaw

Quick Answer

To start your electric chainsaw, ensure the chain brake is disengaged, hold the saw firmly with both hands, press the safety lock button, then pull the On/Off trigger. Release the trigger to stop the chainsaw.

Important: Always ensure the chain is properly tensioned and lubricated before use.

Before You Start

Before operating the chainsaw:

• Check the chain oil level (use biodegradable chain oil only)
• Ensure the chain is correctly tensioned
• Confirm the work area is clear of hazards and bystanders
• Ensure the mains cable is securely connected and supported
• Check the hand guard is in the operating position

Important: Never use the chainsaw without chain oil.

How to Start the Electric Chainsaw

Follow these steps carefully:

1. Disengage the chain brake

Pull the chain brake lever backwards towards the front handle until it clicks into the operating position.

2. Grip the chainsaw correctly

Hold the chainsaw firmly with both hands:

• Left hand on the front handle
• Right hand on the rear handle
• Ensure full grip with fingers and thumbs wrapped securely

3. Unlock and start

• Press and hold the safety lock button with your right thumb
• While holding it, pull the On/Off trigger switch

The chainsaw will start immediately at operating speed.

How to Stop the Chainsaw

To stop the chainsaw:

• Release the On/Off trigger switch

The chain will stop immediately.

Important Information

• Always allow the chain to reach full speed before cutting
• Never start cutting while the chain is stationary
• Do not operate with a loose chain
• Keep hands and body clear of the cutting area at all times
• The safety lock only needs to be used during startup

Important: Incorrect use may increase the risk of kickback or injury.

Frequently Asked Questions

Why won’t my chainsaw start?

Check the chain brake, mains connection, safety lock button, and trigger operation.

Do I need chain oil?

Yes. Always use biodegradable chain oil and check the level before each use.

Can I use the chainsaw without tensioning the chain?

No. A loose chain can come off during operation and is extremely dangerous.

When should I start cutting?

Only when the chain is running at full operating speed.